Use to model still or slow-moving water, such as ponds, rivers, lakes and more. Pour directly from the bottle. Realistic Water is self-leveling, water soluble, won’t crack and has minimal shrinkage. Surface dries firm and clear in approximately 24 hours, depending on humidity conditions. Non-toxic.
Seal water area with Plaster Cloth and use only Woodland Scenics® Earth Colors™ Liquid Pigment, Water Undercoat™ or 100% acrylic paint when preparing your water feature.
One bottle covers an area 17" (43.1 cm) in diameter if poured to a depth of 1/8" (0.31 cm).
16 fl oz (473 mL)
Click here to use our Water Volume Estimator to determine how much product you need to create your water feature.
INSTRUCTIONS:
Do NOT shake.
Covers 227 in2 or 17” diameter when poured 1/8” deep (some shrinkage will occur).
Seal water cavity with Plaster Cloth (C1203, C1191-C1193). For a better seal, apply a layer of Woodland Scenics® plaster (C1201, C1180 or C1199).
Color water area with Earth Colors™ Liquid Pigment (C1214-C1223) or 100% acrylic paint. When water area is completely sealed, colored and dry, pour Realistic Water™ slowly to a depth of 1/8”.
Pull out to edges with a craft stick. Let cure until glass clear (min. 24 hrs). Pour additional layers 1/8” thick, curing each layer until glass clear (max. depth, 1/2”).
Do not apply heat or a top sealer. Not for use with PVA glue. Cure above 70° F. ATTENTION: Store above 32° F. If product gels, let set at room temperature until returned to original state.
Does not cure to a hard surface. Items placed on top will damage surface and permanently adhere.
Do not store finished models vertically.
NOTE: Compatible with all products in the Water System, check labels for instructions